QSY Reamer hydraulic seretse pompo
Tlhaloso ea Sehlahisoa:
QSY series reamer hydraulic mud pompo ke pompo e ncha ea seretse e kentsoeng letsohong la moepo le khannoa ke hydraulic system ea excavator.E arotsoe ka lisenthimithara tse 12, 10-inch, 8-inch, 6-inch le 4-inch ho latela bophara ba phallo.Litlhaloso tse fapaneng.E sebelisoa haholo-holo e le sesebelisoa se thusang sa excavator.Ha ho na le metsi a mangata, seretse, sediment le lehlabathe ha li khone ho cheka, 'me ha ho bonolo bakeng sa lipalangoang ka holim'a sekepe, pompo ea hydraulic sediment sediment e sebelisoa bakeng sa ho ntšoa, e leng ho ntlafatsang ts'ebetso ea mosebetsi haholo.E sebelisoa haholo mererong ea ho chekoa ha litsela tsa metsi, taolong ea sediment ea boema-kepe, ho ntšoa ha sediment ho tsoa matangoaneng a mesaletsa, molemo, likhoerekhoere tsa likhoerekhoere tsa masepala, jj.
Tlhaloso ea mohlala:
200QSY500-20
200 - bophara bo tloaelehileng ba boema-kepe ba ho ntša pompo (mm)
pompo ea seretse ea QSY-hydraulic
500 - sekhahla sa phallo (m3/h)
20 - hlooho ea thomello (m)
Khetho ea pompo:
1. Ho ea ka maemo a sebele a ho sebetsa a mosebedisi, etsa qeto ea sebaka se hlokahalang sa ho phahamisa, ho phalla, le sebaka sa lipalangoang;
2. Sheba li-parameter tsa excavator ho fumana li-parameter tse kang ho falla le khatello ea tsamaiso ea hydraulic ea excavator;
3. Khetha mofuta oa hydraulic motor ho sena;
4. Bala matla a sebele a tlhahiso ea tsamaiso ea hydraulic ea excavator 'me u khethe pompo e loketseng.
Molao-motheo oa ho sebetsa
QSY reamer hydraulic sand pump ke mofuta o mocha oa pompo ea lehlabathe e tsamaisoang ke hydraulic system, e nang le enjene e le actuator, e fetolang matla a haeteroliki hore e be matla a mochini.Ha ho sebetsa, ho potoloha ha impeller ka pompo ea metsi ho fetisetsa matla ho slurry medium, ho etsa hore e hlahise sekhahla se itseng sa ho phalla, ho khanna lintho tse tiileng ho phalla, le ho hlokomela ho fetisoa ha slurry.
Enjene ea hydraulic e khethiloe ho tsoa ho enjene e tsebahalang ea quantitative plunger le motor ea linaleli tse hlano, e nang le litšobotsi tsa sebopeho se tsoetseng pele le se loketseng, ts'ebetso e ntle, ts'ebetso e phahameng le mosebetsi o tsitsitseng.Ho ea ka maemo a sebele a ho sebetsa a bareki, ho khethoa li-motors tse fapaneng tsa ho falla.
Maemo a mosebetsi:
1.Excavator hydraulic drive, pompo ena e loketse Carter, Volvo, Komatsu, Hitachi, Sumitomo, Kobelco, Doosan, Hyundai, XCMG, Sany, Yuchai, Liugong, Longgong, Zhonglian, Shanzhong, Lin Excavators tsa lihlooho tse sa tšoaneng tse kang 120, 150, 200, 220, 240, 300, 330, 360, 400, joalo-joalo.
2. E tsamaisoa ke hydraulic pump station.Motlakase oa hydraulic o sebelisitsoeng pompong ena o loketse liteishene tsa pompo tse nyane, tse mahareng le tse kholo.
Sebopeho sa kemiso ea sehlahisoa
Lintlha tse ka sehloohong
1.Botlaaseng ba pompo bo na le mochine o susumetsang, 'me o ka hlomelloa ka reamer kapa cage mahlakoreng ka bobeli ho lokolla li-deposit, ho eketsa mahloriso a ho ntša, le ho hlokomela ho hula ka mokhoa o itekanetseng.Kopanya hantle bakeng sa ho tšoara habonolo.
2. Pompo ena e ka sebetsana le lisebelisoa tse tiileng tse nang le boholo bo boholo ba likaroloana tsa 50mm, 'me mahloriso a ho ntša metsi a tiileng a ka fihla ho feta 70%;
Tlhokomeliso: Ka lebaka la maemo a fapaneng a ts'ebetso, tlhahiso ea pompo e ka boela ea fapana ho itšetlehile ka lintlha tse kang mecha ea litaba e sebelisoang, ho sebetsa sebakeng sa marang-rang, le sebaka sa ho fana.
3. Sesebediswa sena haholo-holo e hlomamisa ka excavator.Matla a fanoa ke seteishene sa hydraulic sa excavator, se ka hlokomelang phetisetso ea mahala, mme mohloli oa matla ke enjene ea dizeli.E ka rarolla bothata ba tšitiso ea motlakase nakong ea kaho libakeng tse ka thoko.
4. Likarolo tse phallang: Mochini oa pompo, mokelikeli, poleiti ea balebeli, le mochine o susumetsang li entsoe ka alloy e phahameng ea chromium, 'me lisebelisoa tse ling li ka etsoa.
5. Amohela sesebelisoa se ikhethileng sa ho tiisa ho qoba ho khutlisa litiiso tsa mochini khafetsa le ho ntlafatsa melemo ea Sehlahisoa: Ha e bapisoa le lipompo tsa lehlabathe tse ka tlas'a metsi, e na le melemo e latelang:
Phetiso ea 1.Hydraulic e na le inertia e nyane ea ho sisinyeha le lebelo la karabelo e potlakileng, e ka hlokomelang taolo ea lebelo e se nang mohato ka mefuta e mengata;
2. Tšireletso e feteletseng e ka etsoa ka mokhoa o itekanetseng, ha ho na ketsahalo ea motlakase e tukang;
3. Motsoako oa lintho tse tiileng tse kang seretse, sediment le slag li phahame, tse ka fihlang ho feta 70%;
4. E hokahane le mochine o nang le tsamaiso ea hydraulic e kang excavator, e ka hlokomela ho fetisoa ha mahala, haholo-holo libakeng tse hōle, ha matla a sa lekana, melemo e bonahala haholoanyane;
5. E ka sebelisoa e le sehokelo sa moepolli, 'me e ka ntšoa le ho tsamaisoa libaka tse telele ha ho sa ratehe ho eketsa boleng ba moepolli.
Sepheo se seholo:
1. Ho ntšoa ha lehlabathe, ho chekoa, ho chesoa le ho ntšoa ha matsoai boema-kepeng, linōkeng le matšeng.
2. Mokelikeli oa sediment, seretse, le drainage nakong ea kaho ea morero, drainage ea sediment, ho ntšoa ha seretse, majoe a pshatlehileng, joalo-joalo, le kaho ea kou ea leoatle.
3. Ore ea tšepe, letamo la tailings, ore dressing plant le merafo e meng e ntša slag, discharge slurry le litharollo tsohle tse nang le taba e tiileng.
4. E sebelisoa ka metallurgy, tšepe le tšepe le liindasteri tse ling ho ntša mehatla e phahameng ea concentration, li-slags tsa litšila le li-slags tsa tšepe tse phahameng tsa mocheso le lisebelisoa tsa tšepe.
5. Ho ntša metsi ka tšohanyetso le ho hloekisoa ha seretse ka mor'a koluoa.
6. E ka sebelisoa libakeng tse sa tebang tsa metsi le mekhoabo, 'me e ka sebelisoa bakeng sa merero ea ho baballa metsi joalo ka ho chesoa ha noka, nts'etsopele ea matša, kaho ea libaka tse mongobo, ntlafatso ea lebopo la leoatle, nts'etsopele ea letša la letsoai, taolo ea merafo ea tailings, le merero ea ntlafatso ea marshland.
Ha ho bapisoa le phetisetso ea mochini le phetisetso ea motlakase, phetisetso ea hydraulic e na le melemo e latelang:
| Ho bonolo ho fihlella taolo ea lebelo le se nang mohato. | Ho bonolo ho iketsetsa. |
| Ho fetisa tekanyo e matla. | Ho bonolo ho kenya ts'ireletso ea overload. |
| Bokhoni bo boholo ba ho jara. | Ho bonolo ho fihlella maemo a maemo, serialization le kakaretso. |
| Bophelo ba karolo e telele. | Boholo bo nyane, boima bo bobebe le sebopeho se kopaneng. |
Mehato ea ho kenya
1. Ntlha ea pele, etsa bonnete ba hore mochine oa ho epolla o kentsoe ka lithapo tsa hydraulic ho etsa bonnete ba hore melapo ha e na tšitiso.
2. Tlosa bakete 'me u kopanye pompo ea lehlabathe la hydraulic ho letsoho la excavator ka mounting plate.
3. Hokela peipi e kenang ka oli, peipi e khutlisang oli, le phaephe ea ho qhala oli.Tlhokomeliso: Lipeipi tsa oli li tlameha ho hokeloa ka nepo.
4. Kenya hlooho ea reamer, u hlokomele hore u se ke ua e khutlisetsa morao.
5. Mochini oa liteko, haeba hlooho ea reamer e khutlisetsoa morao, feela u khutlisetse morao tse peli.
Lintlha tsa tšebeliso:
1. Etsa bonnete ba hore oli ea hydraulic tsamaisong e hloekile ebile e na le litšila tse fokolang, 'me e na le lubricity e ntle, ho lumellana le botsitso;
2. Ho ea ka khatello e teng ea hydraulic system, displacement, performance, joalo-joalo, ka mokhoa o utloahalang ho hlomella pompo ea sediment e le hore tsamaiso e sebetse ka mokhoa o tloaelehileng 'me e se ke ea feta mojaro oa tsamaiso ka nako e telele;
3. Ha e sebelisoa hammoho le excavator, letsoho la ho epa le lokela ho tsamaea habobebe le butle-butle.Ho thibetsoe ka thata ho e senya kapa ho e senya tlas'a maemo a thata a ho sebetsa ho qoba ho senya 'mele oa pompo.
4. Sebelisa liphaephe tsa oli tsa hydraulic tse tloaelehileng, sebelisa liboutu tse boletsoeng 'me u li tiise ka torque e boletsoeng, ho kenya ka mokhoa o sa lokelang ho tla baka ho hloleha, ho senyeha kapa ho lutla ha oli;
5. Ha thepa e fetisetsoa, sekepe sa oli sa hydraulic se lokela ho bolokoa se hloekile ho thibela ho kena ha litšila, joalo-joalo, e tla ama bophelo bo tloaelehileng ba tšebeletso ea motlakase;
6. Ho thibetsoe ho fetola kapa ho qhaqholla thepa ntle le tumello, ho seng joalo e tla baka ts'ebetso e sa tloaelehang kapa ts'ebetso e sa tloaelehang.
Lintlha tsa mantlha tsa tekheniki tsa QSY (feela bakeng sa litšupiso)
| Che. | Setsebidata | |||||
| Model | Bophara ba Outletmm | Fsekhahla se tlase m³/h | hlooho m | Emotlakase oa pompo ea motlakase kw | Boima ba lijo-thollo mm | |
| 100QSY100-10 | 100 | 100 | 10 | 7.5 | 25 | |
| 80QSY50-22 | 80 | 50 | 22 | 7.5 | 20 | |
| 80QSY50-26 | 80 | 50 | 26 | 11 | 20 | |
| 100QSY80-22 | 100 | 80 | 22 | 11 | 25 | |
| 100QSY130-15 | 100 | 130 | 15 | 11 | 25 | |
| 100 QSY 60-35 | 100 | 60 | 35 | 15 | 25 | |
| 100 QSY 100-28 | 100 | 100 | 28 | 15 | 25 | |
| 150QSY 150-15 | 150 | 150 | 15 | 15 | 30 | |
| 100QSY100-35 | 100 | 100 | 35 | 22 | 25 | |
| 100QSY130-30 | 100 | 130 | 30 | 22 | 25 | |
| 150QSY150-22 | 150 | 150 | 22 | 22 | 30 | |
| 150QSY200-15 | 150 | 200 | 15 | 22 | 35 | |
| 150QSY240-10 | 150 | 240 | 10 | 22 | 35 | |
| 100QSY150-35 | 100 | 150 | 35 | 30 | 25 | |
| 150QSY180-30 | 150 | 180 | 30 | 30 | 30 | |
| 150QSY240-20 | 150 | 240 | 20 | 30 | 35 | |
| 200QSY300-15 | 200 | 300 | 15 | 30 | 35 | |
| 150QSY280-20 | 200 | 280 | 20 | 37 | 35 | |
| 200QSY350-15 | 200 | 350 | 15 | 37 | 35 | |
| 150QSY200-30 | 150 | 200 | 30 | 45 | 30 | |
| 200QSY350-20 | 200 | 350 | 20 | 45 | 40 | |
| 200QSY400-15 | 200 | 400 | 15 | 45 | 40 | |
| 150QSY240-35 | 150 | 240 | 35 | 55 | 30 | |
| 200QSY300-24 | 200 | 300 | 24 | 55 | 40 | |
| 200QSY500-15 | 200 | 500 | 15 | 55 | 45 | |
| 150QSY240-45 | 150 | 240 | 45 | 75 | 35 | |
| 200QSY350-35 | 200 | 350 | 35 | 75 | 45 | |
| 200QSY400-25 | 200 | 400 | 25 | 75 | 45 | |
| 200QSY500-20 | 200 | 500 | 20 | 75 | 46 | |
| 200QSY400-40 | 200 | 400 | 40 | 90 | 45 | |
| 250QSY550-25 | 200 | 550 | 25 | 90 | 45 | |
| 300QSY660-30 | 300 | 660 | 30 | 110 | 50 | |
| 300QSY800-22 | 300 | 800 | 22 | 110 | 50 | |
| 250QSY500-45 | 300 | 500 | 45 | 132 | 50 | |
| 300QSY700-35 | 300 | 700 | 35 | 132 | 50 | |
| 300QSY1000-22 | 300 | 1000 | 22 | 132 | 50 | |
Products foto le sebaka sa ho sebetsa:
